Inspect only what you need and decide the lot by the standard.
Enter the lot size and Traqer tells you how many units to inspect and how many defects the lot accepts, per ISO 2859-1 (NBR 5426). Less inspection time, no math by hand and the same decision for every inspector.
What you get
Plans from the standard
Choose the inspection level (S1 to S4, I, II or III) and the severity (normal, tightened or reduced). Lot ranges, sample sizes and accept (Ac) and reject (Re) numbers are generated for you.
AQL per severity
Set one AQL for major defects and another for minor ones. Critical defects have zero tolerance: a single one rejects the lot.
Automatic decision
With the plan tied to the checklist template, the lot result comes from the defect count in the sample. Every inspector uses the same yardstick.
How it works
Generate the plan
Enter level, severity and AQL for major and minor defects.
Tie it to a template
The plan applies to every checklist created from that template.
Inspect the sample
The checklist shows how many units to inspect and decides pass or fail.
Industries using it

Apparel and textiles
Size-based measurements, sewing and fabric defects, and pre-shipment lot inspection.
Where it usually gets stuckMeasurements checked in spreadsheets, with no clear tolerance per size.

Auto parts and metalworking
Dimensions with tolerance, visual inspection and traceability of every lot and change.
Where it usually gets stuckDimensions written on paper and typed in later.

Construction materials
Materials and components for building sites: measurements, squareness, shade and packaging checked per lot.
Where it usually gets stuckShade or caliber differences found only during installation.

Electronics and appliances
Functional and safety tests, markings and packing, with a trail of every result.
Where it usually gets stuckFunctional tests skipped when deadlines are tight.

Food and nutrition
Net weight, labeling, lot and expiry date, packaging and foreign matter checked per lot.
Where it usually gets stuckLabeling, lot and expiry date checked by eye, with no record.

Footwear and accessories
Bonding, stitching, pair symmetry and finish, with photos of every defect.
Where it usually gets stuckAppearance criteria that change from inspector to inspector.

Furniture and home decor
Dimensions, assembly, finish and packing checked at the supplier or at receiving.
Where it usually gets stuckDimensions checked without a set tolerance.

Housewares
Many SKUs and suppliers, imported by spreadsheet and inspected to one standard.
Where it usually gets stuckA catalog too large to enter by hand.

Packaging
Dimensions, print, strength and high lot volumes, tracked on the dashboard.
Where it usually gets stuckLarge, frequent lots, with no time for spreadsheets.

Toys and children's products
Small parts, points and edges, markings and packing, with evidence kept for every lot.
Where it usually gets stuckSafety defects that must reject the lot at once.
Frequently asked questions
Is AQL the same as NQA?
Yes. NQA is the term used in the Brazilian NBR 5426; AQL (Acceptable Quality Limit) is the term in ISO 2859-1 and ANSI/ASQ Z1.4. The tables are equivalent.
Which inspection level should I use?
Level II is the everyday choice. Special levels S1 to S4 draw smaller samples, for costly or destructive tests, and level III is the strictest.
Can I use my own sampling plans?
Yes. Besides generating the plan from the standard, you can set your own lot ranges and sample sizes.
Other features
See Traqer in your inspection process.
In 30 minutes, we show you how to set up a checklist template and a sampling plan for one of your products.
30 min · no commitment · reply within 1 business day