Skip to content

How to build a quality inspection checklist

A good checklist leads two inspectors to the same result for the same lot. Here is what it needs and how to make each criterion objective.

What it must include

Each item below answers a question someone will ask after the inspection.

  • Identification: order, product or SKU, supplier, lot quantity and inspection location.
  • Sampling plan: how many pieces to inspect and the acceptance and rejection numbers.
  • Visual check: the catalog's defects, each with its class.
  • Measurements: the measuring points with the expected value and tolerance.
  • Packaging and marking: labels, barcode, carton and quantity per carton.
  • Functional tests, when the product needs them: operation, fit, strength.
  • Evidence: photos of the defects and of the lot.
  • Result: accepted or rejected, who inspected and when.

Criteria anyone can check

Replace “check the finishing” with a rule that can be checked: “no loose thread longer than 1 cm in the visible area”. Each check should say what to look at or measure and when it fails.

For measurements, give the value and the tolerance, such as 70 cm ± 1 cm. For fields the inspector fills in, set the acceptance criterion: greater than, less than or equal to, equal to.

In the order the inspector works

Arrange the checks in inspection order, from the closed carton to the piece in hand: outer packaging, count, marking, visual, measurements and tests. Less back and forth, fewer misses.

One template per product family

Instead of one checklist per item, build templates per family, such as t-shirts, sneakers or chairs, and vary only the measurements per SKU. When the standard changes, update the template, and the next checklists come out with the change.

See Traqer in your inspection process.

In 30 minutes, we show you how to set up a checklist template and a sampling plan for one of your products.

Book your free demo

30 min · no commitment · reply within 1 business day